Reports
- D1.1 Quality assurance plan
- D2.1 Case studies: User Requirements and Boundary Conditions Definition
- D2.2 Description of CHESTER simulation model and results
- D2.3 Requirements of the overall CHEST system
- D2.4 Requirements of individual technologies that form the CHEST system
- D3.1 Refrigerant/lubricant interactions testing in high temperature heat pumps
- D3.2 Detailed design of the High Temperature Heat Pump Laboratoty Prototype
- D3.3 Detailed design of the high temperature TES laboratory prototype
- D3.4 Detailed design of the ORC laboratory prototype including SVV expander
- D3.5 Detailed design of the ECT engine-pump laboratory prototype
- D4.1 Start-up and commissioning of the monitoring procedures and environment for data collection from selected pilot cases
- D4.2 Development of the full scale integrated CHEST model
- D4.3 Reporting on monitoring of the selected pilot cases and development of annual energy profiles
- D4.4 Operation modes and control strategies to be implemented at CHEST laboratory prototype
- D4.5 Full scale CHEST system optimization and tecno-economic assessment
- D4.6 Smart Energy Management System for efficient operation of the CHEST system
- D4.9 Roadmap for future development of CHEST system
- D5.1 Laboratory test site completely prepared
- D5.2 Installation and commissioning of components and whole CHEST prototype
- D6.1 Detailed PESTEL and PORTER analysis of the CHEST system
- D6.2 Business cases definition and baseline for Business models
- D6.3 Specification of the CHEST public tool
- D6.4 Market technological potential
- D6.5 Development of the CHEST public tool
- D6.6 Market replicability potential
- D6.7 Development of business models
- D7.1 Dissemination, Communication and Exploitation Plan
Dissemination and Communication materials
Project newsletters
- Newsletter #1
- Newsletter #2
- Newsletter #3
- Newsletter #4
- Newsletter #5
- Newsletter #6
- Newsletter #7
- Newsletter #8
Project press-releases
Publications
- Development of a prototype of a compressed thermal energy storage system.
- Tariff-based load shifting for domestic cascade heat pump with enhanced system energy efficiency and reduced wind power curtailment
- Refrigerant lubricant interaction in high-temperature heat pump and organic Rankine cycle systems
- Dynamic Modelling and Techno-Economic Assessment of a Compressed Heat Energy Storage System
- Thermodynamic analysis of high-temperature pumped thermal energy storage systems: Refrigerant selection, performance and limitations
- Pumped thermal energy storage (PTES) as smart sector-coupling technology for heat and electricity
- A high-temperature heat pump for compressed heat energy storage applications, design, modeling, and performance
- On heat regeneration limitations in heat engines with dense working fluids
- Experimental study of an isobaric expansion engine-pump
- Binary mixtures as working fluids for low temperature waste heat recovery systems with isobaric expansion technology
- Development of a Compressed Heat Energy Storage System Prototype
- A high-temperature heat pump for compressed heat energy storage applications: Design, modeling, and performance
- Experimental results of a 10 kWe organic rankine cycle with a variable volume ratio expander
- Techno-economic assessment of Carnot batteries for load-shifting of solar PV production of an office building
- Refrigerant lubricant interaction in high-temperature heat pump and organic Rankine cycle systems
- Development of a Compressed Heat Energy Storage System Prototype
- Thermodynamic analysis and selection of refrigerants for high-temperature heat pumps
- Excess electricity storage via thermal energy storage
- Pumped thermal energy storage (PTES) as smart sector-coupling technology for heat and electricity
- On the design of heat exchanger equipment for novel-type isobaric expansion engines
- Theoretical limits on the heat regeneration degree, International Journal of Heat and Mass Transfer
- Experimental study of an isobaric expansion engine-pump – Proof of concept
- Energy system benefits of combined electricity and thermal storage integrated with district heating
- Experimental and numerical analysis of variable volume ratio as additional optimisation parameter
- Techno-economic assessment of Carnot batteries for load-shifting of solar PV production of an office building
- Thermodynamic analysis of high-temperature pumped thermal energy storage systems: Refrigerant selection, performance and limitations
- Dynamic Modelling and Techno-Economic Assessment of a Compressed Heat Energy Storage System: Application in a 26-MW Wind Farm in Spain
- A high-temperature heat pump for compressed heat energy storage applications: Design, modeling, and performance
- Tariff-based load shifting for domestic cascade heat pump with enhanced system energy efficiency and reduced wind power curtailment
- Refrigerant lubricant interaction in high-temperature heat pump and organic Rankine cycle systems
Conference posters
- Techno-economic assessment of Carnot Batteries for load-shifting of solar PV production of an office building
- Experimental results of a 10 kWe ORC with variable volume ratio piston expander
- A Carnot battery test set-up consisting of an ORC and a high temperature latent heat thermal storage
- Performance Analysis of a High Temperature Heat Pump for compressed heat energy storage system using R-1233zd(E) as Working Fluid
- Simulation und Bewertung ausgewählter Geschäftsmodelle für eine kombinierte Strom-Wärme-Strom-Speicherung für erneuerbare Energien
